Manufacturer-recommended service intervals and open recall alerts for your 1990 Plymouth Laser.
ZIP unlocks trusted shops near you. Mileage unlocks personalized service due dates. Either or both — your call.
Your ZIP stays with us. We share your city with shops, never your ZIP. Read our Promise →
VISIBILITY:WINDSHIELD
Campaign #90V106001 · Jan 6, 1990
Issue: DILUTED PRIMER MAY HAVE BEEN USED ON THE WINDSHIELD OPENING FLANGES PRIOR TO WINDSHIELD GLASS INSTALLATION WHICH WOULD NOT PROVIDE THE RETENTION REQUIRED BY FMVSS 212.
Risk: WINDSHIELDS WOULD NOT PREVENT EJECTION OF VEHICLEOCCUPANTS DURING A VEHICLE CRASH, WHICH CAUSES SERIOUS INJURIES AND FATALITIES.
Fix: REPLACE WINDSHIELDS, ASSOCIATED PARTS, AND PRIMER.
SEAT BELTS:FRONT:BUCKLE ASSEMBLY
Campaign #95V103003 · May 24, 1995
Issue: THE FRONT SAFETY BELT BUCKLE RELEASE BUTTONS CAN BREAK. THESE RED PLASTIC RELEASE BUTTONS ARE MARKED "PRESS." IF A BUTTON BREAKS, PIECES CAN FALL INTO THE BUCKLE ASSEMBLY CAUSING THE BUCKLE TO OPERATE IMPROPERLY.
Risk: THE SAFETY BELTS WOULD NOT PROVIDE ADEQUATE PROTECTION TO AN OCCUPANT IN A VEHICLE CRASH.
Fix: OWNERS SHOULD PROMPTLY CHECK THE CONDITION AND OPERATION OF BOTH FRONT SAFETY BELT BUCKLES AND CAREFULLY INSPECT THE RED RELEASE BUTTON FOR ANY BREAKS OR CRACKS. THEY SHOULD ENSURE THAT BOTH BUCKLES ARE OPERATING PROPERLY BY INSERTING EACH LATCH PLATE INTO ITS BUCKLE, TUGGING ON THE BELT TO MAKE SURE THE LATCH IS SECURELY LOCKED, AND THEN PRESSING THE RELEASE BUTTON. THE LATCH PLATE SHOULD POP OUT OF THE BUCKLE WHEN THE BUTTON IS PRESSED. IF EITHER RELEASE BUTTON SHOWS A SIGN OF BREAKING OR CRACKING OR IF EITHER BUCKLE FAILS TO OPERATE PROPERLY, OWNERS SHOULD PROMPTLY CONTACT THEIR AUTHORIZED DEALER TO SCHEDULE AN APPOINTMENT TO HAVE THE BUCKLE REPLACED OR REPAIRED, FREE OF CHARGE. THE MANUFACTURER IS DEVELOPING A REMEDY DESIGNED TO PREVENT FAILURE OF THE BUTTONS THAT ARE NOT CURRENTLY BROKEN.
VISIBILITY:SUN/MOON ROOF ASSEMBLY
Campaign #90V056001 · Mar 21, 1990
Issue: OPERATION OF SUNROOF IN "NON-STANDARD" MANNER MAY CAUSE MALE HINGE DISENGAGEMENT FROM THE ROOF HINGE RECEIVER.
Risk: THE SUNROOF GLASS COULD DETACH FROM THE ROOF AND RESULTIN INJURY TO OCCUPANTS OR PERSONS IN THE VICINITY, ESPECIALLY IF THIS OCCURS WHILE THE VEHICLE IS IN MOTION.
Fix: REPLACE MALE HINGE WITH A MODIFIED VERSION TO INCREASE ROOF HINGE RECEIVER RETENTION ABILITY.
ELECTRICAL SYSTEM:WIRING
Campaign #89V128000 · Jul 31, 1989
Issue: WIRING HARNESS FOR THE HEADLAMPS MAY BREAK DUE TO THE STRESS CREATED BY THE HEADLAMP POP UP DEVICES.
Risk: BREAKAGE OF THE WIRING HARNESS CAUSES LOSS OFHEADLAMP ILLUMINATION WHICH COULD HAVE A POTENTIAL FOR AN ACCIDENT.
Fix: HEADLAMP WIRING HARNESS ROUTING WILL BE MODIFIED AND DAMAGED WIRES REPAIRED.
Critical for safety and preventing major damage
Replace engine oil and oil filter. Modern synthetic oil lasts 7,500–10,000 miles.
Estimated cost — typical U.S. ranges
Dealer
~$120–$160
Shop
~$85–$115
DIY
~$25–$55
Full synthetic costs more than conventional. 5-quart 0W-20 + filter is the typical bill.
Rotate tires to ensure even wear and extend tire life.
Estimated cost — typical U.S. ranges
Dealer
~$85
Shop
~$60
DIY
Free
Often free at the shop where you bought the tires — worth asking before paying.
Inspect brake pads, rotors, and fluid. Replace pads if worn below minimum thickness.
Estimated cost — typical U.S. ranges
Dealer
~$85
Shop
~$60
DIY
Free
Most shops do this free as a courtesy with any service. Don't pay separately if you can avoid it.
Replace timing belt (if applicable). Critical failure can cause major engine damage.
Estimated cost — typical U.S. ranges
Dealer
~$935–$1175
Shop
~$655–$825
DIY
Pro only
On interference engines, a snapped belt destroys valves. Worth doing on schedule. Bundle water pump + tensioner — labor is already there.
Keeps your vehicle running smoothly and efficiently
Replace the engine air filter to maintain fuel efficiency and engine performance.
Estimated cost — typical U.S. ranges
Dealer
~$60–$95
Shop
~$45–$70
DIY
~$15–$40
5-minute job on most cars; the airbox lid usually has clips, no tools needed.
Flush and replace engine coolant to prevent overheating and corrosion.
Estimated cost — typical U.S. ranges
Dealer
~$285–$330
Shop
~$200–$235
DIY
~$25–$60
Use the manufacturer-specified coolant — wrong color/chemistry can damage the cooling system.
Replace transmission fluid to keep shifts smooth and prevent wear.
Estimated cost — typical U.S. ranges
Dealer
~$330–$500
Shop
~$235–$355
DIY
~$60–$180
Some sealed transmissions have no dipstick — fill is precise and best left to a shop. Many drivers can still DIY drain-and-fill.
Replace spark plugs for optimal combustion, fuel economy, and performance.
Estimated cost — typical U.S. ranges
Dealer
~$285–$390
Shop
~$200–$275
DIY
~$25–$100
Iridium plugs cost more but last 100k+ miles. V6/V8 access varies wildly — some are tough.
Inspect and replace the serpentine belt to avoid unexpected breakdowns.
Estimated cost — typical U.S. ranges
Dealer
~$195–$235
Shop
~$135–$165
DIY
~$20–$50
DIY-friendly if you can reach the tensioner. Inspect for cracks rather than swap on a strict mileage interval.
Extends the life of your vehicle and improves comfort
Replace the cabin air filter for clean air inside the vehicle.
Estimated cost — typical U.S. ranges
Dealer
~$60–$95
Shop
~$45–$70
DIY
~$15–$40
Usually behind the glovebox. Shops charge labor for a 10-minute job — easy DIY win.
Test battery health and clean terminals. Average battery life is 3–5 years.
Estimated cost — typical U.S. ranges
Dealer
~$225–$390
Shop
~$160–$280
DIY
~$130–$250
Most auto-parts stores test and install batteries free with purchase. Skip the dealer markup.
Check and replace power steering fluid to maintain steering responsiveness.
Estimated cost — typical U.S. ranges
Dealer
~$185–$220
Shop
~$130–$155
DIY
~$15–$40
Most cars built after ~2012 use electric power steering and have no fluid to service.
What drivers and federal regulators have officially reported about the 1990 Plymouth Laser.
NHTSA has 30 complaints on file for the 1990 Plymouth Laser (1995-05 → 2002-08). We haven't reviewed and grouped them yet for this specific vehicle — for now, the full list lives on NHTSA.
Top reported components: ENGINE AND ENGINE COOLING (8) · SEAT BELTS (5) · STRUCTURE (5)
Note: NHTSA also opened 2 defect investigation(s) on this vehicle that closed without action.
Issues on other model years
Source: NHTSA Office of Defects Investigation (ODI). Complaint data refreshed Jul 20, 2026. Investigation data refreshed Jul 26, 2026.
We display NHTSA's record with attribution; we don't editorialize on what these complaints mean for any specific vehicle.
Typical U.S. ranges. Actual quotes vary by shop, parts choice, and vehicle condition.
How we estimate: Dealer = OEM parts × 1.4 + labor × $165/hr. Shop = parts + labor × $115/hr. DIY = parts only.
This maintenance schedule for the 1990 Plymouth Laser reflects general industry intervals for modern vehicles. Your actual service needs may vary based on driving conditions, climate, and vehicle usage. Always consult your owner's manual for model-specific recommendations.