Manufacturer-recommended service intervals and open recall alerts for your 2000 Saturn Sl.
ZIP unlocks trusted shops near you. Mileage unlocks personalized service due dates. Either or both — your call.
Your ZIP stays with us. We share your city with shops, never your ZIP. Read our Promise →
EXTERIOR LIGHTING
Campaign #09E012000 · Jul 4, 2009
Issue: SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.
Risk: DECREASED LIGHTING VISIBILITY MAY RESULT IN A VEHICLE CRASH.
Fix: SABERSPORT WILL NOTIFY OWNERS AND OFFER A FULL REFUND FOR THE NONCOMPLIANT COMBINATION LAMPS. THE SAFETY RECALL BEGAN ON MAY 11, 2009. OWNERS MAY CONTACT SABERSPORT AT 1-909-598-7589.
STRUCTURE:BODY:BUMPERS
Campaign #99V232000 · Aug 23, 1999
Issue: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 581, "BUMPER STANDARD." THESE VEHICLES WERE PRODUCED WITH REAR BUMPER FASTENERS THAT MAY BE LOOSE OR MISSING.
Risk: IF THE FASTENERS ARE LOOSE OR MISSING, THE REAR BUMPER MAY NOT ABSORB ENERGY AS IT WAS DESIGNED TO DO IN THE EVENT OF A REAR END COLLISION.
Fix: DEALERS WILL VERIFY THAT THE REAR BUMPER BEAM FASTENERS ARE PRESENT AND PROPERLY TIGHTENED AND, IF MISSING, INSTALL NEW FASTENERS.
SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS
Campaign #99V231000 · Aug 24, 1999
Issue: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 135, "PASSENGER CAR BRAKE SYSTEMS." THESE VEHICLES WERE PRODUCED WITH BRAKE PIPE ATTACHMENT NUTS THAT MAY NOT BE TIGHTENED TO SPECIFICATIONS.
Risk: IF THE BRAKE PIPE NUTS ARE NOT PROPERLY TIGHTENED, BRAKE FLUID LEAKAGE COULD OCCUR, INCREASING THE BRAKE'S STOPPING DISTANCE.
Fix: DEALERS WILL INSPECT THE BRAKE PIPE NUTS FOR LEAKAGE, VERIFY THEY ARE TIGHTENED TO SPECIFICATIONS, AND REPLACE THE BRAKE PIPES IF NEEDED.
UNKNOWN OR OTHER
Campaign #99V230000 · Aug 23, 1999
Issue: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 208, "OCCUPANT CRASH PROTECTION." SOME OF THESE VEHICLES WERE MANUFACTURED WITH WELDS IN THE INSTRUMENT PANEL CARRIER ASSEMBLY THAT DO NOT MEET SATURN QUALITY STANDARDS.
Risk: A FRONT SEAT OCCUPANT, PARTICULARLY AN UNBELTED OCCUPANT, MAY HAVE AN INCREASED RISK OF INJURY IN A FRONTAL CRASH.
Fix: DEALERS WILL REPAIR THE VEHICLE'S INSTRUMENT PANEL CARRIER ASSEMBLY.
POWER TRAIN:AUTOMATIC TRANSMISSION:PARK/NEUTRAL START INTERLOCK SWITCH
Campaign #00V310000 · Dec 10, 2000
Issue: VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES, EQUIPPED WITH AUTOMATIC TRANSAXLES, FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 114, "THEFT PROTECTION." THESE VEHICLES WERE BUILT WITH AN IMPROPERLY ADJUSTED AUTOMATIC TRANSAXLE PARK LOCK CABLE ASSEMBLY. IF IMPROPERLY ADJUSTED, IT IS POSSIBLE TO SHIFT FROM THE "PARK" POSITION WITH THE IGNITION KEY REMOVED.
Risk: THIS CONDITION INCREASES THE RISK OF A CRASH RESULTING FROM THE UNINTENDED MOVEMENT OF PARKED VEHICLES.
Fix: SATURN IS ASKING OWNERS AND RETAILERS TO PERFORM A FUNCTIONAL CHECK OF THE AUTOMATIC TRANSAXLE PARK LOCK CABLE ASSEMBLY OPERATION, AND IF NECESSARY, TO HAVE THE CABLE ADJUSTED. IF OWNERS ARE NOT COMFORTABLE PERFORMING THE FUNCTIONAL CHECK THEMSELVES, THEY CAN HAVE THEIR DEALER PERFORM THIS INSPECTION FOR THEM.
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
Campaign #00V309000 · Dec 10, 2000
Issue: VEHICLE DESCRIPTION: CERTAIN PASSENGER VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FMVSS NO. 301, "FUEL SYSTEM INTEGRITY." THESE VEHICLES WERE BUILT WITH AN INADEQUATE VENT VALVE WELD ON THE TOP PORTION OF THE FUEL TANK.
Risk: FUEL SPILLAGE COULD OCCUR DURING REFUELING OR IF THE VEHICLE WERE INVOLVED IN A ROLLOVER. IF AN IGNITION SOURCE WERE PRESENT, A FIRE COULD OCCUR.
Fix: DEALERS WILL INSPECT THE VEHICLE TO ENSURE THE FUEL TANK VENT VALVE IS PROPERLY WELDED. IF NECESSARY, DEALERS WILL REPLACE THE FUEL TANK ASSEMBLY.
SEAT BELTS:FRONT:ANCHORAGE
Campaign #99V280000 · Oct 20, 1999
Issue: VEHICLE DESCRIPTION: PASSENGER VEHICLES. THESE VEHICLES DO NOT COMPLY WITH REQUIREMENTS OF FMVSS NO. 210, "SEAT BELT ASSEMBLY ANCHORAGES." SOME OF THE VEHICLES WERE PRODUCED WITH SEAT BELT SHOULDER GUIDE ANCHOR BOLTS THAT WERE NOT ADEQUATELY TIGHTENED AT THE CENTER PILLAR AND COULD FALL OUT, MAKING THE SEAT BELT INOPERATIVE.
Risk: IN THE EVENT OF A CRASH, THE SEAT OCCUPANT MAY NOT BE PROPERLY RESTRAINED.
Fix: DEALERS WILL INSPECT THESE VEHICLES FOR PROPER INSTALLATION AND TORQUE OF THE SEAT BELT SHOULDER GUIDE ANCHOR BOLTS.
STRUCTURE:BODY
Campaign #99V297000 · Oct 27, 1999
Issue: VEHICLE DESCRIPTION: PASSENGER VEHICLES EQUIPPED WITH A CONSOLE ARMREST FAIL TO COMPLY WITH REQUIREMENTS OF FMVSS NO. 201, "OCCUPANT PROTECTION IN INTERIOR IMPACTS." THE ARMRESTS WERE PRODUCED WITH A LATCH THAT WILL NOT WITHSTAND THE VERTICAL FORCE REQUIREMENTS OF THE STANDARD.
Risk: IN THE EVENT OF A CRASH, THE LATCH MAY OPEN AND THE ARMREST OR THE CONTENTS OF THE CONSOLE COULD INJURE AN OCCUPANT.
Fix: DEALERS WILL REPLACE THE CONSOLE ARMREST LATCH.
Critical for safety and preventing major damage
Replace engine oil and oil filter. Modern synthetic oil lasts 7,500–10,000 miles.
Estimated cost — typical U.S. ranges
Dealer
~$120–$160
Shop
~$85–$115
DIY
~$25–$55
Full synthetic costs more than conventional. 5-quart 0W-20 + filter is the typical bill.
Rotate tires to ensure even wear and extend tire life.
Estimated cost — typical U.S. ranges
Dealer
~$85
Shop
~$60
DIY
Free
Often free at the shop where you bought the tires — worth asking before paying.
Inspect brake pads, rotors, and fluid. Replace pads if worn below minimum thickness.
Estimated cost — typical U.S. ranges
Dealer
~$85
Shop
~$60
DIY
Free
Most shops do this free as a courtesy with any service. Don't pay separately if you can avoid it.
Replace timing belt (if applicable). Critical failure can cause major engine damage.
Estimated cost — typical U.S. ranges
Dealer
~$935–$1175
Shop
~$655–$825
DIY
Pro only
On interference engines, a snapped belt destroys valves. Worth doing on schedule. Bundle water pump + tensioner — labor is already there.
Keeps your vehicle running smoothly and efficiently
Replace the engine air filter to maintain fuel efficiency and engine performance.
Estimated cost — typical U.S. ranges
Dealer
~$60–$95
Shop
~$45–$70
DIY
~$15–$40
5-minute job on most cars; the airbox lid usually has clips, no tools needed.
Flush and replace engine coolant to prevent overheating and corrosion.
Estimated cost — typical U.S. ranges
Dealer
~$285–$330
Shop
~$200–$235
DIY
~$25–$60
Use the manufacturer-specified coolant — wrong color/chemistry can damage the cooling system.
Replace transmission fluid to keep shifts smooth and prevent wear.
Estimated cost — typical U.S. ranges
Dealer
~$330–$500
Shop
~$235–$355
DIY
~$60–$180
Some sealed transmissions have no dipstick — fill is precise and best left to a shop. Many drivers can still DIY drain-and-fill.
Replace spark plugs for optimal combustion, fuel economy, and performance.
Estimated cost — typical U.S. ranges
Dealer
~$285–$390
Shop
~$200–$275
DIY
~$25–$100
Iridium plugs cost more but last 100k+ miles. V6/V8 access varies wildly — some are tough.
Inspect and replace the serpentine belt to avoid unexpected breakdowns.
Estimated cost — typical U.S. ranges
Dealer
~$195–$235
Shop
~$135–$165
DIY
~$20–$50
DIY-friendly if you can reach the tensioner. Inspect for cracks rather than swap on a strict mileage interval.
Extends the life of your vehicle and improves comfort
Replace the cabin air filter for clean air inside the vehicle.
Estimated cost — typical U.S. ranges
Dealer
~$60–$95
Shop
~$45–$70
DIY
~$15–$40
Usually behind the glovebox. Shops charge labor for a 10-minute job — easy DIY win.
Test battery health and clean terminals. Average battery life is 3–5 years.
Estimated cost — typical U.S. ranges
Dealer
~$225–$390
Shop
~$160–$280
DIY
~$130–$250
Most auto-parts stores test and install batteries free with purchase. Skip the dealer markup.
Check and replace power steering fluid to maintain steering responsiveness.
Estimated cost — typical U.S. ranges
Dealer
~$185–$220
Shop
~$130–$155
DIY
~$15–$40
Most cars built after ~2012 use electric power steering and have no fluid to service.
What drivers and federal regulators have officially reported about the 2000 Saturn Sl.
NHTSA has 179 complaints on file for the 2000 Saturn Sl (1999-11 → 2018-07). We haven't reviewed and grouped them yet for this specific vehicle — for now, the full list lives on NHTSA.
Top reported components: POWER TRAIN (37) · ENGINE AND ENGINE COOLING (36) · ELECTRICAL SYSTEM (34)
Issues on other model years
Source: NHTSA Office of Defects Investigation (ODI). Complaint data refreshed Jul 10, 2026. Investigation data refreshed Jul 26, 2026.
We display NHTSA's record with attribution; we don't editorialize on what these complaints mean for any specific vehicle.
Typical U.S. ranges. Actual quotes vary by shop, parts choice, and vehicle condition.
How we estimate: Dealer = OEM parts × 1.4 + labor × $165/hr. Shop = parts + labor × $115/hr. DIY = parts only.
This maintenance schedule for the 2000 Saturn Sl reflects general industry intervals for modern vehicles. Your actual service needs may vary based on driving conditions, climate, and vehicle usage. Always consult your owner's manual for model-specific recommendations.