The 2016 Mazda Cx 3 carries 3 open NHTSA recalls — most recently covering hatchback/liftgate and steering. Owners report 6 recurring issue clusters, led by “Back-over camera recall parts delay and failure.” Mazda's Skyactiv engines use unusually high compression ratios (13:1 to 16:1) and require strict adherence to oil intervals — extending oil life on a Skyactiv engine accelerates carbon buildup on intake valves. Mazda's published Schedule 1 (severe) covers most US driving conditions. Mazda3, CX-5, CX-30, and CX-50 share the Skyactiv-G platform.
STRUCTURE:BODY:HATCHBACK/LIFTGATE
Campaign #16V644000 · Jun 9, 2016
Issue: Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15, 2011, to December 26, 2015. On the affected vehicles, the lift gate support struts may corrode, possibly causing the struts to break and/or the lift gate to drop unexpectedly.
Risk: If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Fix: Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
STEERING
Campaign #16V203000 · Nov 4, 2016
Issue: Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31, 2015. The lower mounting nuts and bolts that attach the front strut assembly to the steering knuckle may loosen, allowing the steering knuckle to separate.
Risk: If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash.
Fix: Mazda will notify owners, and dealers will inspect the lower mounting nuts and bolts that secure the front strut assembly to the steering knuckle. If the bolts are loose, they will be replaced and then correctly tightened, free of charge. The recall is expected to begin May 20, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9316D.
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Campaign #23V487000 · Jul 14, 2023
Issue: Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
Risk: A rearview camera that does not display properly can reduce the driver's rear view, increasing the risk of a crash or injury.
Fix: Dealers will inspect and replace the rearview camera, as necessary. In addition, dealers will install a wiring harness fastening seal. All repairs will be performed free of charge. Interim notification letters, notifying owners of the safety risk, were mailed September 13, 2023. Final owner letters for affected models and model years in the states of CT, MA, MD, NJ, NY, PA and VA were mailed August 14, 2024. The remaining owner notification letters will be mailed at a future date, anticipated on or before May 1, 2025. Owners may contact Mazda customer service at 1-800-222-5500, Option 6. Mazda's number for this recall is 6023G.
What drivers and federal regulators have officially reported about the 2016 Mazda Cx 3.
BACK OVER PREVENTION
6 NHTSA complaints · 2024-01 → 2024-12
“The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available”
“The contact stated that while reversing, the rearview camera image was distorted on several occasions, and was black on other occasions”
EXTERIOR LIGHTING
7 NHTSA complaints · 2019-12 → 2024-02
“THE HEADLIGHTS HAVE CONTAINED MOISTURE FOR THE LAST 4 YEARS, CAUSING DIFFUSED, DIMMED VISIBILITY AT NIGHT...VERY DANGEROUS”
“I have already drivers side front replaced at the dealer, now the passenger side front is showing lots of moisture inside the headlamp”
ELECTRICAL SYSTEM
6 NHTSA complaints · 2020-06 → 2024-02
“The infotainment center has a mind of its own. It's going berserk”
“The media console screen on my Mazda CX-3 has spiderweb-like cracking”
SEATS
2 NHTSA complaints · 2019-12 → 2023-10
“Drivers seat constantly sinks down as you are driving. It will not stay in place”
“THE SEAT CONSTANTLY DEFLATES WHEN IT'S PUMPED UP TO THE TALLEST SETTING”
FUEL/PROPULSION SYSTEM
5 NHTSA complaints · 2019-12 → 2025-01
“The vehicle abruptly stalled and I managed to pull over on the side of the road”
“the engine stalled and shut off at approximately 50 mph and coasted the vehicle to the side of the road”
VEHICLE SPEED CONTROL
3 NHTSA complaints · 2016-02 → 2016-12
“IN THE PAST 4 MONTHS OF OWNING THE VEHICLE I HAVE HAD 4 EPISODES OF UNINTENDED ACCELERATION”
“I TURNED INTO A PARKING SPOT AND WAS SLOWING DOWN .EVERYTHING SEEMED NORMAL WHEN SUDDENLY THE CAR SPED UP INTO A WOODED AREA”
Issues on other model years
Source: NHTSA Office of Defects Investigation (ODI). Complaint data refreshed Sep 13, 2026. Investigation data refreshed Sep 13, 2026.
We display NHTSA's record with attribution; we don't editorialize on what these complaints mean for any specific vehicle.
Critical for safety and preventing major damage
Replace 0W-20 full-synthetic oil every 5,000 miles under Schedule 1. Schedule 2 (highway-only): 7,500 miles. Mazda CX-50 Turbo and CX-9: 5,000 miles regardless of schedule.
Estimated cost — typical U.S. ranges
Dealer
~$120–$160
Shop
~$85–$115
DIY
~$25–$55
Full synthetic costs more than conventional. 5-quart 0W-20 + filter is the typical bill.
Rotate tires every 7,500 miles. AWD CX-5, CX-50, and CX-9: 5,000 miles to prevent uneven wear from front-biased AWD coupling.
Estimated cost — typical U.S. ranges
Dealer
~$85
Shop
~$60
DIY
Free
Often free at the shop where you bought the tires — worth asking before paying.
Inspect brake pads, rotors, and parking brake at every oil change. Mazda3 and CX-5 front pads typically last 35,000-50,000 miles.
Estimated cost — typical U.S. ranges
Dealer
~$85
Shop
~$60
DIY
Free
Most shops do this free as a courtesy with any service. Don't pay separately if you can avoid it.
Replace DOT 3 brake fluid every 30,000 miles or 36 months.
Estimated cost — typical U.S. ranges
Dealer
~$180–$200
Shop
~$125–$140
DIY
~$10–$25
DOT 3 or 4 — match the cap. Vacuum bleeders make this a one-person DIY.
Keeps your vehicle running smoothly and efficiently
Replace engine air filter every 30,000 miles. Skyactiv-G direct injection is sensitive to airflow restriction — inspect at every oil change.
Estimated cost — typical U.S. ranges
Dealer
~$60–$95
Shop
~$45–$70
DIY
~$15–$40
5-minute job on most cars; the airbox lid usually has clips, no tools needed.
Replace ATF every 60,000 miles severe / 100,000 normal. Use Mazda FZ ATF — substitutes cause harsh 1-2 shifts and torque converter shudder.
Estimated cost — typical U.S. ranges
Dealer
~$330–$500
Shop
~$235–$355
DIY
~$60–$180
Some sealed transmissions have no dipstick — fill is precise and best left to a shop. Many drivers can still DIY drain-and-fill.
Iridium spark plugs every 60,000 miles on Skyactiv-G 2.0L and 2.5L. CX-50 Turbo and CX-9 Turbo: 45,000 miles.
Estimated cost — typical U.S. ranges
Dealer
~$285–$390
Shop
~$200–$275
DIY
~$25–$100
Iridium plugs cost more but last 100k+ miles. V6/V8 access varies wildly — some are tough.
Mazda FL-22 (yellow): first change at 120,000 miles or 10 years, then every 60,000. Do not substitute — silicate-free formula prevents water pump damage on Skyactiv engines.
Estimated cost — typical U.S. ranges
Dealer
~$285–$330
Shop
~$200–$235
DIY
~$25–$60
Use the manufacturer-specified coolant — wrong color/chemistry can damage the cooling system.
AWD CX-5, CX-50, CX-9: replace transfer case fluid and rear diff fluid every 60,000 miles.
Estimated cost — typical U.S. ranges
Dealer
~$105–$140
Shop
~$75–$100
DIY
~$15–$40
AWD/4WD vehicles only. Easy drain-and-fill on most platforms.
Extends the life of your vehicle and improves comfort
Replace cabin air filter every 15,000 miles. Behind the glove box on Mazda3, CX-5, CX-30, and CX-50.
Estimated cost — typical U.S. ranges
Dealer
~$60–$95
Shop
~$45–$70
DIY
~$15–$40
Usually behind the glovebox. Shops charge labor for a 10-minute job — easy DIY win.
Occupant deaths in fatal crashes (FARS)
9 crashes 2010–2024
FARS counts every occupant death in a fatal crash, whatever the cause — it does not mean the vehicle was at fault or defective. Counts are not adjusted for how many of each vehicle are on the road. How to read this number
Owner-reported problem signals
Separate from the federal fatality data above: complaints owners filed with NHTSA about this year and model. These are reports of problems, unverified, and are counted here only as signals.
4
complaints mentioning a crash
0
complaints mentioning a fire
Reviewed known issues for this vehicle·Open recalls for this vehicle
Typical U.S. ranges. Actual quotes vary by shop, parts choice, and vehicle condition.
How we estimate: Dealer = OEM parts × 1.4 + labor × $165/hr. Shop = parts + labor × $115/hr. DIY = parts only.
This maintenance schedule for the 2016 Mazda Cx 3 reflects Mazda's published service intervals. Your actual service needs may vary based on driving conditions, climate, and vehicle usage. Always consult your owner's manual for model-specific recommendations.