Every record we hold for this vehicle, as plain tables, with nothing added. The consumer page shows the same records with the maintenance schedule, price ranges and nearby shops around them.
vehicle
2007 / ford / fusion
known issues
5 clusters (reviewed 2026-09-20)
complaints
1,064 on file (2007-03-28 → 2025-08-05)
recalls
0
investigations
0
fars
213 occupant deaths, crash years 2010-2024 (legacy-code)
Hydraulic control unit leak causing loss of brakingSERVICE BRAKES, HYDRAULIC24 complaints2018-09 → 2023-08fusion-2007-hcu-brake-fluid-leak
11441965 In January of 2020 and again in October of 2020, I received recall notices regarding the recall of the Hydraulic Control Unit (HCU) per the 19S54 / 19V-904 recall notice. Once the part was available, I scheduled the work and brought my Fusion to DCH Ford of Eatontown 764. The
11539889 ABS and WRENCH icon are flashing on dashboard. Car making a terrible noise from underneath . I try to drive the car but it loses power and goes into LIMP mode. I have read many problems with the ABS control module valves sticking open due to the wrong type of brake fluid put in
11507897 This vehicle was totaled in May 2020. I had numerous and constant brake issues with this car and had much of the brake system (brake pads, rotors, and calipers I believe) replaced within a year of the accident. The accident occurred when I tried to apply the brakes, causing me
Wrench light illuminates with rough shifting and power lossPOWER TRAIN6 complaints2018-10 → 2022-06fusion-2007-wrench-light-power-loss
11143862 WHILE DRIVING ON A HIGHWAY THE WRENCH LIGHT ILLUMINATED AND I EXPERIENCED AN UNEXPECTED, SUDDEN LOSS OF ENGINE POWER AND ACCELERATION. THE VEHICLE RAPIDLY DECREASED IN SPEED FROM HIGHWAY SPEEDS TO BARELY BEING ABLE TO MAINTAIN SPEEDS OF 20MPH
11218012 MY ISSUE IS WHAT MANY PEOPLE HAVE ALREADY COMPLAINED ABOUT - THE SHIFTING IS EXTREMELY ROUGH, TO THE POINT IT'S NOW UNDRIVABLE AND UNSAFE. THE 'WRENCH' LIGHT AND CHECK ENGINE LIGHT HAVE JUST COME ON, ALTHOUGH THE SLIPPING OF GEARS HAS GONE ON FOR QUITE A WHILE
11156379 WHILE I WAS DRIVING ON A DRY, PAVED ROAD, THE CHECK ENGINE LIGHT ACTIVATED WHILE PASSING AND THE VEHICLE'S RPMS FLUCTUATED BETWEEN 500 AND 2000 WITH BARELY ANY ENGINE POWER. VEHICLE WAS PULLED OVER, TURNED OFF, TURNED BACK ON AGAIN, AND APPEARED TO RESUME NORMAL OPERATION
Takata air bag recall parts unavailable or delayedAIR BAGS106 complaints2018-09 → 2024-04fusion-2007-takata-airbag-recall-delay
11475952 Takata recall. The contact owns a 2007 Ford Fusion. The contact received notification of NHTSA Campaign Number: 21V158000 (Air Bags) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had
11522307 The contact owns a 2007 Ford Fusion. The contact stated that the vehicle was previously repaired under NHTSA Campaign Number: 17V024000 (Air Bags) however, the failure recurred after the recall repair was performed. The contact stated that while driving at an undisclosed speed
11534070 The contact owned a 2007 Ford Fusion. The contact stated while driving 40 MPH, and merging into the slow lane, he crashed into a vehicle that stopped abruptly. Additionally, the vehicle was rear-ended by another vehicle. The driver air bag exploded. The contact was able to exit
Seat weight sensor fault triggers air bag warning lightAIR BAGS, SEATS6 complaints2020-07 → 2025-08fusion-2007-seat-sensor-airbag-warning
11492773 Took my car on to check why seat belt light was on after bag replaced. Told there is a sensor under passenger seat that reflects weight in seat that is not working that is used in case accident airbag pressure would be deployed. Light will not turn off on dash and told me out of
11573752 MY AIRBAG LIGHT CAME ON 2 DAYS AFTER DRIVER SIDE AIR BAG WAS REPLACED. DEALER WANTED $129.50 TO TELL ME THE REASON. AFTER CHECKING I WAS TOLD IT IS SOMEWHERE IN THE WIRING IN THE PASSENGER SEAT AND IT WILL COST ME $500. TO REMOVE THE SEAT AND THE SEAT COVERS AND AN ESTIMATED
11678640 Drivers seat moved back while driving and now won't move forward I am only 4ft 8 inch tall and driving my car is very difficult I have seen a lot of other people complaining of the same thing and something needs to be done
Brake pedal travels to floor with reduced stopping powerSERVICE BRAKES34 complaints2018-09 → 2022-06fusion-2007-brake-pedal-goes-to-floor
11449777 The contact owns a 2007 Ford Fusion. The contact received notification of Customer Satisfaction Program Number: 21N11 (Service Brakes, Hydraulic). The contact stated that while starting the vehicle, the brake pedal went to the floorboard while depressed. The contact had to apply
11373225 I GOT IN AN ACCIDENT WHEN I WAS MERGING ONTO THE HIGHWAY BECAUSE I WENT TO BRAKE AND THEY ALL THE SUDDEN WOULDN'T WORK AND WENT STRAIGHT TO THE FLOOR. THIS WAS CAUSED BECAUSE OF THE RECALL ON THE BRAKES
11386137 THIS CAR WAS PURCHASED IN 2011WITH 68,000 MILES AT TIME OF PURCHASE. IT WAS PURCHASED AT TOM MOSANOS IN BERKS COUNTY, PA . IT WAS PAID OFF AT THE END OF 2017, THEN NOW ALL THE RECALLS 4 OR 5 DIFFERENT RECALLS AND SERIOUS RECALLS . I HAVE ABSOLUTLEY NO BRAKES ALL WAS TO THE FLOOR
FARS counts every occupant death in a fatal crash, whatever the cause — it does not mean the vehicle was at fault or defective. Counts are not adjusted for how many of each vehicle are on the road.
Cite this
Derived data is CC BY 4.0. Link back to the page you used. Text and BibTeX below.
Wrench.Pro (2026). 2007 Ford Fusion vehicle data [dataset]. https://www.wrench.pro/data/vehicles/2007/ford/fusion
@misc{wrenchpro_2007_ford_fusion_2026,
author = {Wrench.Pro},
title = {Wrench.Pro vehicle data: 2007 Ford Fusion},
year = {2026},
howpublished = {\url{https://www.wrench.pro/data/vehicles/2007/ford/fusion}},
note = {Derived from NHTSA public records. CC BY 4.0.}
}
