2013 BMW 128i: raw data

Every record we hold for this vehicle, as plain tables, with nothing added. The consumer page shows the same records with the maintenance schedule, price ranges and nearby shops around them.

vehicle	2013 / bmw / 128i
known issues	3 clusters (reviewed 2026-09-10)
complaints	39 on file (2013-05-21 → 2025-10-30)
recalls	3
investigations	1
fars	4 occupant deaths, crash years 2010-2024 (legacy-code)
indexed	yes
license	CC BY 4.0 (derived)

Known Issues clusters all years →

Takata airbag recall parts unavailableAIR BAGS22 complaints2016-03 → 2017-11128i-2013-takata-airbag-recall-delay

10845897 I BEGAN THE PROCESS OF BUYING A NEW BMW IN DECEMBER 2015. NOW THAT I CAN DEVOTE TIME TO THE PROCESS, I CALLED BMW WESTCHESTER, NY AND TOLD I CAN NOT ORDER MY NEW BMW DUE TO THE 2013 BMW HAVING A RECALL. THERE IS NO REMEDY FOR FAULTY AIRBAGS AT THIS TIME
10934276 TAKATA RECALL I AM WRITING TO COMPLAIN ABOUT THE TIMELINESS OF THIS RECALL ON MY CAR. I WAS INFORMED OF THIS RECALL AT THE BEGINNING OF FEBRUARY OF THIS YEAR. IT HAS BEEN OVER 10 MONTHS I HAVEN'T HEARD ANYTHING BACK ABOUT THE STATUS OF WHEN THIS RECALL IS GOING TO BE FIXED
11024625 TL* TAKATA RECALL. THE CONTACT OWNS A 2013 BMW 128I. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 16V071000 (AIR BAGS); HOWEVER, THE PART NEEDED FOR THE REPAIR WAS NOT AVAILABLE

Passenger airbag occupancy sensor warning lightAIR BAGS3 complaints2024-09 → 2025-10128i-2013-airbag-occupancy-sensor-warning

11679043 The contact owns a 2013 BMW 128I. The contact stated that after starting the vehicle, the air bag warning light illuminated. The contact also stated that while his wife was seated in the front passenger’s seat, the passenger’s side air bag warning light illuminated
11614818 Front passenger air bag seat occupancy sensor (OC3) mat warning "Passenger restraint system. Fault in passenger restraint system affecting airbag" BMW has an extended warranty for this exact issue on several other models, but not the 1 series which should be included
11696560 The contact owns a 2013 BMW 128I. The contact stated that the air bag warning light remained illuminated. The local dealer was not contacted. The vehicle was not repaired. The failure was a recurring failure, and the vehicle was parked and no longer driven due to safety concerns

Engine cooling recall parts unavailableENGINE AND ENGINE COOLING3 complaints2022-05 → 2023-03128i-2013-engine-cooling-recall-delay

11466120 The contact owns a 2013 BMW 128i. The contact stated while driving at 30 MPH, she smelled a strong burning odor. There was no warning light illuminated. The contact stated that the failure reoccurred several times while driving
11464493 The contact owns a 2013 BMW 128i. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The dealer was made aware of the issue
11514539 The contact owns a 2013 BMW 128I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The local dealer was contacted

NHTSA complaints (summary) all years →

count	earliest_date	latest_date	crash_flagged	fire_flagged	top_components
39	2013-05-21	2025-10-30	1	1	AIR BAGS:27; ENGINE:4; ENGINE AND ENGINE COOLING:4; STRUCTURE:3; SERVICE BRAKES:2

Recalls all years →

campaign_number	report_received_date	component	summary	consequence	remedy
20V017000	15/01/2020	AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE	BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.	An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.	BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
16V071000	05/02/2016	AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE	BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i xDrive Sedans, 2009-2011 335d sedans, 2006-2012 325xiT, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xDrive, 335i, 335xi, 335i xDrive, 335is and M3 Coupes and Convertibles, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i SAVs, 2007-2010 X3 xDrive30i SAVs, 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M SAVs, 2009-2013 BMW X5 xDrive35d SAVs, 2008-2014 X6 xDrive35i, X6 xDrive50i, and X6 M SACs, 2010-2011 BMW X6 xDrive50i SACs and 2008-2011 M3 Sedan vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.	In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.	BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018. Owners may contact BMW customer service at 1-800-525-7417.
22V119000	02/03/2022	ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)	BMW of North America, LLC (BMW) is recalling certain 2008-2013 1 Series Coupe (128i); 2007-2013 3 Series Coupe (328i, 328xi, 328i xDrive); 2007-2010 X3 SAV (X3 3.0si, X3 xDrive30i); 2008-2013 1 Series Convertible (128i); 2006-2011 3 Series Sedan (325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi); 2006-2012 3 Series Wagon (328i, 328i xDrive); 2007-2013 3 Series Convertible (328i); 2006-2010 5 Series Sedan (525i, 525xi, 528i, 528xi, 530i, 530xi); 2006-2007 5 Series Wagon (530xi); 2007-2010 X5 SAV (X5 3.0si, X5 xDrive30i); 2006-2008 Z4 Coupe (Z4 3.0si); and 2006-2011 Z4 Roadster (Z4 3.0i, Z4 3.0si, Z4 sDrive30i) vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.	An electrical short can cause the PCV valve heater to overheat, increasing the risk of a fire while driving or, soon after driving when parked.	This recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Dealers will install an electrical wiring harness with fuse protection for the PCV Valve heater in potentially affected vehicles, free of charge. This recall supersedes and expands previous NHTSA recalls 17V-683 and 19V-273. Vehicles previously repaired under the prior recalls will need to come back for the new recall remedy. The remedy is currently being developed. Interim owner notification letters informing owners of the safety risk were mailed on April 1, 2022. Owner notification letters were mailed on July 22, 2022. Owners may contact BMW customer service at 1-800-525-7417.

Investigations all years →

action_number	status	subject	components	opened	closed	recall_campaign	summary
EA21002	open	Desiccated Air Bag Inflator Rupture	AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE	2021-09-17	·	·	From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

FARS occupant deaths all years →

crash_years	occupant_deaths	match_type	vpic_recovered
2010-2024	4	legacy-code	0

FARS counts every occupant death in a fatal crash, whatever the cause — it does not mean the vehicle was at fault or defective. Counts are not adjusted for how many of each vehicle are on the road.

Cite this

Derived data is CC BY 4.0. Link back to the page you used. Text and BibTeX below.

Wrench.Pro (2026). 2013 BMW 128i vehicle data [dataset]. https://www.wrench.pro/data/vehicles/2013/bmw/128i

@misc{wrenchpro_2013_bmw_128i_2026,
  author = {Wrench.Pro},
  title = {Wrench.Pro vehicle data: 2013 BMW 128i},
  year = {2026},
  howpublished = {\url{https://www.wrench.pro/data/vehicles/2013/bmw/128i}},
  note = {Derived from NHTSA public records. CC BY 4.0.}
}

hub · known-issues · methodology · license · research (interpretation)