Every record we hold for this vehicle, as plain tables, with nothing added. The consumer page shows the same records with the maintenance schedule, price ranges and nearby shops around them.
| vehicle | 2013 / honda / accord |
|---|---|
| known issues | 7 clusters (reviewed 2026-08-19) |
| complaints | 1,420 on file (2012-10-02 → 2026-09-16) |
| recalls | 5 |
| investigations | 6 |
| fars | 251 occupant deaths, crash years 2010-2024 (legacy-code) |
| indexed | yes |
| license | CC BY 4.0 (derived) |
| count | earliest_date | latest_date | crash_flagged | fire_flagged | top_components |
|---|---|---|---|---|---|
| 1420 | 2012-10-02 | 2026-09-16 | 67 | 9 | STEERING:499; ELECTRICAL SYSTEM:414; ENGINE:179; UNKNOWN OR OTHER:119; SERVICE BRAKES:115 |
| campaign_number | report_received_date | component | summary | consequence | remedy |
|---|---|---|---|---|---|
| 17V418000 | 29/06/2017 | ELECTRICAL SYSTEM:12V/24V/48V BATTERY | Honda (American Honda Motor Co.) is recalling certain 2013-2016 Honda Accord vehicles. The case for the battery sensor, part of the battery management system, may allow water to get in, potentially causing an electrical short. | An electrical short increases the risk of a fire. | Honda will notify owners, and dealers will replace the sensor, free of charge. Dealers will perform an interim remedy of applying adhesive to the case to prevent water intrusion. The recall began November 8, 2017. Owners may contact American Honda Customer Support Center at 1-888-234-2138. Honda's number for this recall is KG0. |
| 13V297000 | 08/07/2013 | FUEL SYSTEM, GASOLINE | American Honda Motor Co., Inc. (Honda) is recalling certain model year 2013 Accord vehicles that are Low-Emission Vehicle (LEV) II rated that were manufactured January 15, 2013, through April 5, 2013. The fuel tank neck may be out of specification causing the fuel pump to not properly seal to the fuel tank. | An insufficent seal may led to a fuel leak which increases the risk of a fire. | Honda will notify owners, and dealers will replace the fuel tank, nut and O-ring gasket free of charge. The recall began during August 2013. Honda's recall number is JA9. Owners may contact Honda at 1-310-783-2000. |
| 20V769000 | 10/12/2020 | POWER TRAIN:DRIVELINE:DRIVESHAFT | Honda (American Honda Motor Co.) is recalling certain 2013-2015 Accord vehicles equipped with a 4-cylinder engine and a continuously-variable transmission that were originally sold, or ever registered, in Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The drive shafts were assembled with a lubricant that may have degraded the drive shafts' protective coating, making it more susceptible to damage from road salt or other contaminants, and potentially cause it to break. | A broken drive shaft may cause a sudden loss of drive power. The vehicle could also roll away if the parking brake has not been applied before the vehicle has been exited. Either condition can increase the risk of a crash or injury. | Honda will notify owners, and dealers will inspect the drive shafts, replacing both the left and right drive shafts, if necessary, free of charge. The recall began February 4, 2021. Owners may contact Honda customer service at 1-888-234-2138. |
| 23V858000 | 18/12/2023 | FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP | Honda (American Honda Motor Co.) is recalling certain 2013-2023 Honda Accord, Civic Coupe, Civic Sedan, Civic Hatchback, Civic Type R, CR-V, HR-V, Ridgeline, Odyssey, Acura ILX, MDX, MDX Hybrid, RDX, RLX, TLX, 2019-2022 Honda Insight, Passport, 2020 Honda CR-V Hybrid, 2018-2019 Honda Clarity PHEV, Fit, and 2015-2020 Honda Accord Hybrid, Pilot, Acura NSX vehicles. The fuel pump inside the fuel tank may fail. | Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash. | Dealers will replace the fuel pump module, free of charge. Owner letters were mailed September 6, 2024. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KGC and KGD. This recall is an expansion of NHTSA recall numbers 21V-215 and 20V-314. |
| 25V422000 | 19/06/2025 | POWER TRAIN:DRIVELINE:DRIVESHAFT | Honda (American Honda Motor Co.) is recalling certain 2013 Honda Accord vehicles equipped with a 4-cylinder engine and a continuously-variable transmission. The affected vehicles were originally sold, or ever registered, in Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, Virginia, West Virginia, and Wisconsin. The driveshaft may corrode and break, due to damage from road salt or other contaminants. | A broken driveshaft can result in a loss of drive power, or a vehicle rollaway when the vehicle is in park without the parking brake applied. Both scenarios can increase the risk of a crash or injury. | Dealers will inspect and replace the driveshaft assemblies as necessary, free of charge. Owner notification letters were mailed August 11, 2025. Owners may contact Honda's customer service at 1-888-234-2138. Honda's number for this recall is OM2. This recall expands previous recall number 20V769. |
| action_number | status | subject | components | opened | closed | recall_campaign | summary |
|---|---|---|---|---|---|---|---|
| EA21002 | open | Desiccated Air Bag Inflator Rupture | AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE | 2021-09-17 | · | · | From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open. |
| SQ99002 | open | HEADLAMP WIRING | EXTERIOR LIGHTING | 1999-01-25 | · | · | HONDA HAS APPARENTLY ISSUED A REPAIR KIT FOR HEADLAMP WIRING FOR THE HONDA ACCORD WHICH DOES NOT INCLUDE A SET OF INSTRUCTIONS FOR HOW THE WORK IS TO BE COMPLETED.THE PRODUCT NUMBER FOR THIS REPAIR KIT IS 06200-SEO-306 WITH COMPONENT PART NUMBERS 32119-SEO-3050 0060-1 AND 32109-SEO-3050 006002.THE AGENCY HAS RECEIVED EIGHT RECALL RELATED CONSUMER COMPLAINTS RELATED TO HEADLAMP ELECTRICAL PROBLEMS IN 1986 AND 1987 ACCORDS.THIS INVESTIGATION WAS OPEN TO DETERMINE THE REASONS WHY HONDA ISSUED THIS REPAIR KIT WITHOUT INCLUDING INSTRUCTIONS.THIS INVESTIGATION WILL ALSO EXAMINE THE FREQUENCY WITH WHICH HONDA HAS ISSUED OTHER REPAIR KITS WITHOUT INCLUSION OF INSTRUCTION.CLOSING NOTE: ALL INFORMATION AVAILABLE FROM THIS INVESTIGATION INDICATES THAT HONDA'S PRACTICE OF ISSUING REPAIR KITS WITHOUT INSTRUCTIONS IS REASONABLE SINCE INSTALLATION INSTRUCTIONS ARE REPORTEDLY AVAILABLE FROM DEALERS. |
| DP20005 | closed | Loss of Direction Control | STEERING | 2020-11-23 | 2021-05-07 | · | The Office of Defects Investigation (ODI) received a petition dated October 19, 2020 requesting an investigation of an alleged defect in the steering system in Model Year (MY) 2013 Honda Accord vehicles. The petitioner alleges that MY2013 Honda accord vehicles are experiencing a sudden loss of steering control as the vehicle veers from its intended path of travel. The petitioner further alleges that this deviation from the intended path of travel occurs without warning or driver input while operating the vehicle under normal driving conditions. The petition itself can be reviewed at NHTSA.gov |
| EA19001 | closed | Electrical overstress | AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE | 2019-04-19 | 2024-09-19 | 20V024 | The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mount |
| EA21001 | closed | Loss of Direction Control | STEERING | 2021-05-06 | 2023-08-25 | · | On May 6, 2021, the Office of Defects Investigation (ODI) opened Engineering Analysis (EA21-001) to assess a sudden loss of steering control, in Model Year (MY) 2013-2015 Honda Accord vehicles. Consumers alleged while driving the steering wheel would pull to the left or the right independently. Steering pull may pose a risk of loss of directional control. Honda stated that they believed the inadvertent steering input was caused by a loose magnet located within the electronic power steering (EPS) system. Due to poor formulation of the adhesive, this magnet can become loose and move up to 2 degr |
| PE14033 | closed | Electric Power Steering Failure | STEERING:ELECTRIC POWER ASSIST SYSTEM | 2014-11-04 | 2015-10-06 | · | The Office of Defects Investigation (ODI) opened PE14-033 to investigate 24 complaints alleging loss of power steering while driving in model year (MY) 2013 Honda Accord vehicles equipped with electric power steering (EPS).Analysis of service data for the original 24 complaints and 33 additional complaints received after PE14-033 was opened found that 85 percent of the vehicles with diagnostic trouble codes available to identify the faulty component had a code indicating torque sensor failure (DTC 53).In its response to ODI's information request letter for PE14-033, Honda identified two manufa |
| crash_years | occupant_deaths | match_type | vpic_recovered |
|---|---|---|---|
| 2010-2024 | 251 | legacy-code | 0 |
FARS counts every occupant death in a fatal crash, whatever the cause — it does not mean the vehicle was at fault or defective. Counts are not adjusted for how many of each vehicle are on the road.
Derived data is CC BY 4.0. Link back to the page you used. Text and BibTeX below.
Wrench.Pro (2026). 2013 Honda Accord vehicle data [dataset]. https://www.wrench.pro/data/vehicles/2013/honda/accord
@misc{wrenchpro_2013_honda_accord_2026,
author = {Wrench.Pro},
title = {Wrench.Pro vehicle data: 2013 Honda Accord},
year = {2026},
howpublished = {\url{https://www.wrench.pro/data/vehicles/2013/honda/accord}},
note = {Derived from NHTSA public records. CC BY 4.0.}
}hub · known-issues · methodology · license · research (interpretation)