2016 Jeep Wrangler: raw data

Every record we hold for this vehicle, as plain tables, with nothing added. The consumer page shows the same records with the maintenance schedule, price ranges and nearby shops around them.

vehicle	2016 / jeep / wrangler
known issues	7 clusters (reviewed 2026-08-13)
complaints	460 on file (2016-03-16 → 2026-09-13)
recalls	5
investigations	3
fars	91 occupant deaths, crash years 2010-2024 (legacy-code)
indexed	yes
license	CC BY 4.0 (derived)

Known Issues clusters all years →

ABS control module internal fault (C2200)SERVICE BRAKES95 complaints2022-03 → 2026-07wrangler-2016-abs-module-c2200

11732536 The ABS module (68259556AD) on my 2016 JKU is not working (code C2200) and the part is not available anywhere. I tried buying online and reaching out to a dealership, but everyone acknowledges Stellantis doesn’t have the part available. There are posts on Jeep forums from 2023
11683730 In February of 2024, my ABS, traction control and brake warning lights came on. This disables the ABS, traction control and cruise control. After scanning the vehicle for codes, there is a C2200 internal fault for the ABS control module. Making sure it is not a sensor issue, I
11687428 Jeep Wrangler Unlimited ABS, Brake, & Traction Control warning lights all came on at once while driving. Once jeep stopped vehicle went into limp mode limiting power and MPH to less than 30 MPH. Which is a huge safety problem when all the roads to and from out house are 45 MPH

Front brake caliper binding and brake line restrictionSERVICE BRAKES10 complaints2021-09 → 2025-06wrangler-2016-brake-caliper-binding

11667897 Left front brake caliper not releasing. Replaced caliper and brake pads, problem still exist. After some research found that there has been an issue with brake line. Apparently the mounting bracket on the line has in some cases pinched the line restricting fluid flow causing
11432220 I am reporting a dangerous brake part on all of the later model wranglers. The front brake lines collapse because of a clamp holding the brake line. This happened to our 2016 Jeep Wrangler willys edition it is garaged and only has 25,342 miles. The dealer wanted 2700 to redo all
11539022 Had right front brakes, caliper and rotor replaced two times in the past 6 months. Same problem. At times, brakes feel like they are stuck and will not release. Standard transmission and there is no roll back on inclined driveway. Drove it 5 miles home when it started messing

Cylinder misfire with rocker arm and camshaft wearENGINE7 complaints2022-11 → 2024-05wrangler-2016-rocker-arm-misfire

11518067 75,000 MILES, ENGINE TICKING ON COLD START, ENGINE LIGHT FOR CYL 2 MISFIRE, ENGINE CHUGS AND HAS LOW ACCELERATION. DEALER REPLACED ROCKER ARM UNDER OWNER'S EXTENDED WARRANTY. DID NOT FIX PROBLEM AND NOW ARE DISASSEMBLING ENGINE. READ MANY OTHER CUSTOMERS WITH SAME PROBLEM, CLASS
11499392 The contact owns a 2016 Jeep Wrangler. The contact stated while driving at an undisclosed speed, she heard a tapping sound under the hood of the vehicle. No warning light was illuminated. The dealer was notified of the failure and indicated that the rocker arm and the camshaft
11491858 P0302 code popped up all four rocker arms on left cylinder need to be replaced. Jeep had normal oil change 50k miles

Oil filter housing and oil cooler crackingENGINE16 complaints2021-08 → 2025-11wrangler-2016-oil-filter-housing-crack

11427730 Oil filter housing/Oil cooler cracked. Dealership says its a common problem on 2014+ jeeps with 3.6 liter engine yet Jeep hasn't issued a recall. Dealer stated that this seems to happen around 50,000 miles on vehicle. No warning lights came on, noticed smoke coming from under
11499201 Oil Housing Unit crack. Just bought vehicle used. Weather dropped to 28 degrees and oil housing unit cracked. All oil poured out of vehicle and would not hold any oil when more was added. Took vehicle to Jeep dealer and they confirmed that the PLASTIC piece that was the original
11566095 Oil filter housing is made of plastic and over time the plastic, exposed to heat cycle and elements from being under the plenum, becomes brittle and cracks. The cracks in the oil filter housing create a susbtantial oil leak that drips engine oil onto the exhaust and is a

Steering wheel clock spring failureAIR BAGS17 complaints2021-09 → 2025-12wrangler-2016-clock-spring-failure

11618464 The airbag light came on, then went off. This happened for a while, meanwhile, the horn stopped working and the controls in the steering wheel were incapable of anything for the radio. I was informed it was a bad steering clock spring and it needed to be replaced. Part #
11498201 The contact owns a 2016 Jeep Wrangler. The contact stated while driving 40 MPH, the contact attempted to blow the horn and no sound came from the horn. The contact stated that the steering wheel became difficult to steer and the controls on the steering wheel were inoperable
11644420 I had someone cut me off on the highway, I went to honk my horn & it didn't work. I then also noticed that my steering wheel control buttons did not work, or light up either. Upon investigation I found out that those are all symptoms of the clockspring not working properly &

Engine stalling and power loss while drivingELECTRICAL SYSTEM, ENGINE9 complaints2022-04 → 2026-07wrangler-2016-engine-stall

11710238 My 2016 jeep wrangler jk will just stop running all power is lost, it's happened on the freeway as well as around town multiple times.. I get no codes. Once I can pull off the hiway it has always started back up after removing key and placing key back in ignition it starts
11525150 As I drive, the car loses the ability to accelerate. It then passively stalls and the automatic steering locks up. All electrical inside the car still stays on. I put the car in park and it restarts on the first key turn. It has happened up to 3 times in a trip, but it is
11508891 2016 Jeep Wrangler intermittently misfires then immediately loses power and dies. Also loses power steering at the same time. It almost caused an accident and is a big safety concern. Now I drive in the right lane in case I have to hurry and pull off the side of road. I turn the

Air bag non-deployment in a crashAIR BAGS7 complaints2022-06 → 2025-06wrangler-2016-airbag-non-deployment

11531292 The contact owned a 2016 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, another vehicle driving at high speeds rear-ended the contact's vehicle, causing her vehicle to flip over twice; however, no air bags were deployed. The contact sustained a
11572931 Stopped at traffic light. Hit from behind, into vehicle in front of said vehicle. Air bags did not deploy. Police report filed; insurance representative, jeep dealership all have inspected. No warning lamps, messages or other symptoms prior to the failure. Rear ended at traffic
11468135 I ran into a truck that stopped in the middle of the road, The impact was hard. My airbags didnt deploy. My chest is hurting

NHTSA complaints (summary) all years →

count	earliest_date	latest_date	crash_flagged	fire_flagged	top_components
460	2016-03-16	2026-09-13	28	15	SERVICE BRAKES:136; ENGINE:88; AIR BAGS:77; POWER TRAIN:74; ELECTRICAL SYSTEM:56

Recalls all years →

campaign_number	report_received_date	component	summary	consequence	remedy
19V018000	15/01/2019	AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE	Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.	In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.	Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
19V680000	26/09/2019	SEAT BELTS:FRONT:ANCHORAGE	Chrysler (FCA US LLC) is recalling certain 2011-2018 Jeep Wrangler right hand drive vehicles. The driver's seat belt buckle mounting strap may fracture and separate from the seat frame.	A separated or severed seat belt buckle strap will result in an inoperable seat belt, increasing the risk of injury in the event of a crash.	FCA US will notify owners, and dealers will replace the driver's seat belt buckle, free of charge. Interim notices informing owners of the safety risk were mailed November 19, 2019. Owners will received a second letter and the recall began March 26, 2020. Owners may contact FCA customer service at 1-800-853-1403. FCA's number for this recall is VA6.
16V734000	13/10/2016	AIR BAGS:FRONTAL:SENSOR/CONTROL MODULE-INACTIVE	Chrysler (FCA US LLC) is recalling certain model year 2016-2017 Jeep Wrangler vehicles manufactured June 16, 2015, to August 14, 2016. In certain crash conditions, the front impact sensor wiring may be pulled until it detaches before a signal can be received by the Occupant Restraint Controller (ORC).	If the ORC module does not receive a signal from the front impact sensor, both frontal air bags and the seat belt pretensioners will not deploy in the event of a crash, increasing the risk of injury.	Chrysler will notify owners, and dealers will reroute the front impact sensor wiring and relocate the impact sensor branch, free of charge. The recall began on November 10, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S76.
16V288000	11/05/2016	AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE	Chrysler (FCA US LLC) is recalling certain model year 2011-2016 Right Hand Drive Jeep Wrangler vehicles manufactured February 16, 2010, to May 2, 2016. The clockspring assembly may become contaminated with dust and cause the air bag circuit to fail.	Failure of the air bag circuit may prevent the driver's frontal air bag from deploying in the event of a crash, increasing the risk of injury.	Chrysler will notify owners, and dealers will replace the clockspring, wheel back cover, and column shroud, free of charge. The recall began on August 11, 2016. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S40.
24V196000	14/03/2024	AIR BAGS:FRONTAL:DRIVER CLOCKSPRING/SPIRAL CASSETTE	Chrysler (FCA US, LLC) (Stellantis) is recalling certain right hand drive 2016 Jeep Wrangler vehicles. Debris contamination may cause the clockspring to fail, preventing the driver's air bag from deploying in a crash.	An air bag that does not deploy in a crash can increase the risk of injury.	Dealers will replace the clockspring, steering wheel back cover, and steering column shrouds, free of charge. Owner notification letters were mailed April 4, 2024. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 27B.

Investigations all years →

action_number	status	subject	components	opened	closed	recall_campaign	summary
EA21002	open	Desiccated Air Bag Inflator Rupture	AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE	2021-09-17	·	·	From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
EA19001	closed	Electrical overstress	AIR BAGS: AIR BAG/RESTRAINT CONTROL MODULE	2019-04-19	2024-09-19	20V024	The Office of Defects Investigation (ODI) opened this investigation to determine if the failure of airbags to deploy during severe crashes, in certain vehicles, was the result of a safety related defect. During the investigation a complex failure was studied that can result in non-deployment of subject vehicle air bags and other restraint system devices in severe crash events. The subject vehicles may be equipped with an airbag control unit (ACU) for the supplemental restraint system (SRS) Electronic Control Unit (ECU) manufactured by ZF-TRW. The ECU receives signals from crash sensors mount
PE19008	closed	Seat belt buckle bracket failure	SEAT BELTS:FRONT:BUCKLE ASSEMBLY	2019-07-29	2019-12-12	19V680000	On July 17, 2019, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-008 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging the driver's side seat belt buckle separated from the seat frame, rendering the seat belt non-functional. The VOQs involved model year (MY) 2015 and 2016 Jeep Wrangler (JK platform) that were configured for right-hand drive (RHD) use. On August 8, 2019, ODI issued an information request (IR) letter to FCA.The scope of the IR included all JK Wrangler produced for sale in the U.S. (both left- and right-hand drive), and

FARS occupant deaths all years →

crash_years	occupant_deaths	match_type	vpic_recovered
2010-2024	91	legacy-code	0

FARS counts every occupant death in a fatal crash, whatever the cause — it does not mean the vehicle was at fault or defective. Counts are not adjusted for how many of each vehicle are on the road.

Cite this

Derived data is CC BY 4.0. Link back to the page you used. Text and BibTeX below.

Wrench.Pro (2026). 2016 Jeep Wrangler vehicle data [dataset]. https://www.wrench.pro/data/vehicles/2016/jeep/wrangler

@misc{wrenchpro_2016_jeep_wrangler_2026,
  author = {Wrench.Pro},
  title = {Wrench.Pro vehicle data: 2016 Jeep Wrangler},
  year = {2026},
  howpublished = {\url{https://www.wrench.pro/data/vehicles/2016/jeep/wrangler}},
  note = {Derived from NHTSA public records. CC BY 4.0.}
}

hub · known-issues · methodology · license · research (interpretation)