2011 BMW 135i: raw data

Every record we hold for this vehicle, as plain tables, with nothing added. The consumer page shows the same records with the maintenance schedule, price ranges and nearby shops around them.

vehicle	2011 / bmw / 135i
known issues	5 clusters (reviewed 2026-09-08)
complaints	66 on file (2010-07-06 → 2026-03-25)
recalls	6
investigations	1
fars	9 occupant deaths, crash years 2010-2024 (legacy-code)
indexed	yes
license	CC BY 4.0 (derived)

Known Issues clusters all years →

Takata airbag recall parts delayAIR BAGS16 complaints2016-03 → 2017-11135i-2011-takata-airbag-recall-delay

10937668 I'VE BEEN WAITING FOR NEARLY TEN MONTHS TO BE NOTIFIED ABOUT WHEN REPLACEMENT PARTS WOULD BE AVAILABLE FOR MY CAR'S RECALLED DRIVER-SIDE AIRBAG MODULE (RECALL CAMPAIGN NO. 16V-071)
10911379 RECALL CAMPAIGN NO. 16V-071: DRIVER'S FRONT AIR BAG MODULE, THIS IS A DANGEROUS SITUATION, NOT RESOLVED BY BMW
10908304 TAKATA RECALL NOTICE FROM BMW IS DATED AND WAS RECEIVED IN MARCH 2016. CALLED BMW CUSTOMER RELATIONS NUMBER 800-525-7417 SEVERAL TIMES SINCE MARCH WITH THE SAME REPLY THAT BMW HAS NO PARTS AND DOESN'T KNOW ANY MORE
10892455 TL* THE CONTACT OWNS A 2011 BMW 135I. THE CONTACT RECEIVED A RECALL NOTIFICATION FOR NHTSA CAMPAIGN NUMBER: 16V071000 (AIR BAGS) AND STATED THAT THE PART NEEDED WAS UNAVAILABLE TO PERFORM THE RECALL REPAIR

Blower motor wiring smoke and fireELECTRICAL SYSTEM7 complaints2018-06 → 2026-03135i-2011-blower-motor-wiring-fire

11153013 THE VEHICLE WAS IN MOTION AND THE BLOWER MOTOR RESISTOR HARNESS BEGAN TO SMOKE HEAVILY. THE A/C STOPPED WORKING. I PULLED OVER AND DISCONNECTED THE WIRING HARNESS AND PULLED THE FUSE. THE WIRES MELTED, THE CONNECTOR MELTED, AND THE RESISTOR IS BROKEN
11112733 BLOWER MOWER WIRING OVERHEATING AND BURNING/CORRODING WHILE FAN WAS ON LOW SPEED
11112792 FAN BLOWER WIRE CAN CATCH FIRE, BMW 3 SERIES E90 2006 TO 2013 ALREADY GOT THE RECALL DONE, PLEASE RECALL THIS
11727086 The contact owns a 2011 BMW 135I. The contact stated that the A/C system and the blower motor were intermittently inoperable. The vehicle was taken to an independent mechanic, where the blower motor was replaced; however, the failure persisted

High-pressure fuel pump failureFUEL/PROPULSION SYSTEM7 complaints2010-10 → 2019-10135i-2011-hpfp-failure

11268125 HIGH PRESSURE FUEL PUMP FAILURE - CAR WENT INTO LIMP MODE WHILE DRIVING ON A CITY STREET
11112223 THE HIGH PRESSURE FUEL PUMP HAS FAILED AND BEEN REPLACED MULTIPLE TIMES. IT BEGINS WITH THE CAR TAKING MUCH LONGER TO CRANK AND START. THEN IT COMPLETELY FAILS POTENTIALLY WHILE DRIVING, CREATING A SAFETY ISSUE, OR WILL NO LONGER START
11165487 TWO TIMES WITHIN A YEAR THE VEHICLE HAS EXPERIENCED A REDUCTION OF POWER AND THE CHECK ENGINE LIGHT CAME ON
10854451 BMW 2011 52I , FUEL PUMP WIRE PLUG IS GET HOT BURN HOLD AT TOP OF PUMP HOUSING , WHEN TANK IS FULL IT LEAK OUT UNDER REAR SEAT

DCT hesitation and lurch at low speedPOWER TRAIN10 complaints2012-11 → 2022-04135i-2011-dct-hesitation-lurch

11460025 I had two situations in which my car would unexpectedly lurch forward after coming to a complete stop with my foot on the brake pedal, and another case in which I could not place the vehicle in park with the DCT Shift lever malfunctioning and making the car undrivable
10607508 UNINTENDED ACCELERATION BECAUSE OF DUAL-CLUTCH TRANSMISSION (DCT); CAR WAS IN DRIVE SLOWING TO STOP SIGN. ALMOST AT STOP CAR LURCHED 2 TO 3 FEET INTO THE INTERSECTION BEFORE I COULD SLAM ON BRAKES
10497673 CROSSING THE STREET---I HAD THE GAS PEDDLE ALL THE WAY TO THE FLOOR (TWICE YESTERDAY) AND THE CAR LITERALLY DID NOT MOVE AND TRAFFIC WAS APPROACHING
10505289 THE VEHICLE HESITATED WHEN THE LIGHT TURNED GREEN AND I WAS HIT IN THE REAR

Engine stall and power loss while drivingENGINE9 complaints2013-08 → 2024-09135i-2011-engine-stall-power-loss

11321309 ROD BEARINGS FAILURE WHICH COULD CAUSE ENGINE SEIZING WHILE DRIVING
11453558 Sudden catastrophic engine shutdown After 3weeks of investigation came back as bad crank posisition sensor
10783391 TL* THE CONTACT OWNS A 2011 BMW 135I. WHILE DRIVING 60 MPH, THE VEHICLE OVERHEATED AND LOST POWER
11616579 BMW Series 135I2011 - Engine/Vanos bolts failed/failing! When it's started, you can total tell there is an issue with it...Car is basically NON-Drivable due to this condition due to safety concerns

NHTSA complaints (summary) all years →

count	earliest_date	latest_date	crash_flagged	fire_flagged	top_components
66	2010-07-06	2026-03-25	1	4	AIR BAGS:22; ENGINE:18; ELECTRICAL SYSTEM:16; POWER TRAIN:7; FUEL/PROPULSION SYSTEM:6

Recalls all years →

campaign_number	report_received_date	component	summary	consequence	remedy
19V579000	06/08/2019	ELECTRICAL SYSTEM:WIRING	BMW of North America, LLC (BMW) is recalling certain 2008-2012 BMW 128i, 135i, 135is Coupes and 128i, 135i Convertible vehicles. The wiring and electrical connectors in the blower-regulator wiring harness may overheat.	Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.	BMW will notify owners, and dealers will inspect the blower-regulator wiring harness, and replace it with a new part, free of charge. The recall began October 4, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion of an earlier recall number 17V-676.
20V017000	15/01/2020	AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE	BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.	An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.	BMW will notify owners, and dealers will replace the driver air bag. On X5 and X6 vehicles, only the inflator will be replaced. All repairs will be performed free of charge. The recall began March 11, 2020. Owners may contact BMW customer service at 1-800-525-7417.
17V067000	02/02/2017	POWER TRAIN:DRIVELINE:CONSTANT VELOCITY JOINT	BMW of North America, LLC (BMW) is recalling certain 2011-2012 135i Coupe, 1 Series M Coupe and 135i Convertible vehicles, 2011 Z4 sDrive 35i, 335i, 335d, 335i Coupe, 335is Coupe, 335i Convertible, 335is Convertible, 535i, 535i xDrive, 535i Gran Turismo and 550i xDrive Gran Turismo vehicles and 2012 740i and 740Li vehicles. The rear driveshaft constant velocity (CV) joint on the affected vehicles may fatigue and break.	If the CV joint breaks, the vehicle may have a loss of propulsion, increasing the risk of a crash.	BMW will notify owners, and dealers will inspect the rear driveshaft CV joint and, based on its production date, will replace it, free of charge. The recall began April 21, 2017. Owners may contact BMW customer service at 1-800-525-7417.
16V071000	05/02/2016	AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE	BMW of North America, LLC (BMW) is recalling certain model year 2008-2013 128i and 135i coupes and convertibles and 1 Series M coupes, 2006-2011 325i, 325xi, 328i, 328xi, 328i xDrive, 330i, 330xi, 335i, 335xi, 335i xDrive Sedans, 2009-2011 335d sedans, 2006-2012 325xiT, 328i and 328xi sports wagons, 2007-2013 328i, 328xi, 328i xDrive, 335i, 335xi, 335i xDrive, 335is and M3 Coupes and Convertibles, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i SAVs, 2007-2010 X3 xDrive30i SAVs, 2007-2013 X5 xDrive30i, X5 xDrive35i, X5 xDrive48i, X5 xDrive50i and X5 M SAVs, 2009-2013 BMW X5 xDrive35d SAVs, 2008-2014 X6 xDrive35i, X6 xDrive50i, and X6 M SACs, 2010-2011 BMW X6 xDrive50i SACs and 2008-2011 M3 Sedan vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.	In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.	BMW will notify owners, and dealers will replace the driver's frontal air bag module or inflator depending on the vehicle model, free of charge. The recall began March 9, 2018. Owners may contact BMW customer service at 1-800-525-7417.
14V176000	10/04/2014	ENGINE AND ENGINE COOLING:ENGINE	BMW of North America, LLC (BMW) is recalling certain model year 2010-2011 128i Coupe, 128i Convertible, 328i Sedan, 328i xDrive Sedan, 328i Coupe, 328i Convertible, 328i Sports Wagon and Z4 sDrive 30i, 2011-2012 135i Coupe, 135i Convertible, 335i Sedan, X5 xDrive 35i, and X6 xDrive 35i, 2011 335i xDrive Sedan, 335i Coupe, 335i Convertible, 528i Sedan, 535i Sedan, 535i xDrive Sedan, X3 xDrive 28i, and X3 xDrive 35i, 2010 X3 xDrive 30i, and X5 xDrive 30i, 2012 640i Coupe, and 640i Convertible and 2010-2012 535i Gran Turismo vehicles. In the affected vehicles, the bolts that secure the housing for the variable camshaft timing adjustment (VANOS) unit can loosen over time and may possibly break.	If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.	BMW will notify owners, and dealers will replace the four VANOS housing bolts for both VANOS units (intake and exhaust), free of charge. In addition, owners of approximately 170,172 model year 2010-2012 BMW vehicles equipped with inline 6 cylinder engines not covered by this recall, will receive an extended warranty to address this condition. The recall began on September 24, 2014. Owners may contact BMW at 1-800-525-7417.
13V044000	07/02/2013	ELECTRICAL SYSTEM	BMW is recalling certain model year 2008-2012 1-Series coupes and convertibles manufactured December 2007 through September 2011; and 2007-2011 3-Series coupes and convertibles manufactured March 2007 through October 2011; 2007-2011 3-Series sedans manufactured March 2007 through October 2011; 2007-2011 3-Series sports wagons manufactured March 2007 through June 2011; and 2009-2011 Z4 vehicles manufactured March 2009 through June 2011. In February 2013, BMW recalled 504,545 vehicles. In July 2013, BMW informed the agency that it was adding 1-Series, 3-Series, and Z4 vehicles, representing an additional 12,094 vehicles. The total number of vehicles being recalled is now 516,791. The connector for the positive battery cable connector and the corresponding terminal on the fuse box may degrade over time. Over time, the high current flow and heat from electrical resistance may lead to a breakage of the connection, and a loss of electrical power to the vehicle.	If there is a loss of electrical power to the vehicle, the vehicle may unexpectedly stall, increasing the risk of a crash.	BMW will notify owners, and dealers will replace the positive battery cable connector and secure it with an improved method, free of charge. The recall began on March 13, 2013. Owners may call BMW at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.

Investigations all years →

action_number	status	subject	components	opened	closed	recall_campaign	summary
EA21002	open	Desiccated Air Bag Inflator Rupture	AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE	2021-09-17	·	·	From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

FARS occupant deaths all years →

crash_years	occupant_deaths	match_type	vpic_recovered
2010-2024	9	legacy-code	0

FARS counts every occupant death in a fatal crash, whatever the cause — it does not mean the vehicle was at fault or defective. Counts are not adjusted for how many of each vehicle are on the road.

Cite this

Derived data is CC BY 4.0. Link back to the page you used. Text and BibTeX below.

Wrench.Pro (2026). 2011 BMW 135i vehicle data [dataset]. https://www.wrench.pro/data/vehicles/2011/bmw/135i

@misc{wrenchpro_2011_bmw_135i_2026,
  author = {Wrench.Pro},
  title = {Wrench.Pro vehicle data: 2011 BMW 135i},
  year = {2026},
  howpublished = {\url{https://www.wrench.pro/data/vehicles/2011/bmw/135i}},
  note = {Derived from NHTSA public records. CC BY 4.0.}
}

hub · known-issues · methodology · license · research (interpretation)